Komatsu — 3.2.8 Grease pump

Operation 3.2 Explanation of components 3.2.7 Towing pin 1. Insert towing pin (1) into hole (2) in the counterweight. 1 2 GK038042 2. Use linch pin (3) to set so that the towing pin does not come out. Reverse this operation to remove the pin. 3 GK038043 3.2.8 Grease pump The grease pump is installed in the holder on the left radiator side of the engine bulkhead at the rear of the machine. After using it, wipe off the grease from its outside and install it in position. Insert the grease pump in the holder and fix it with the rubber band. Hitch the tail chain of the grease pump to the hook at the bottom of the holder. GK038044 WA380-6H – VEAM440100 3-67