Operation 3.3 Operation The time that the preheating pilot lamp (2) stays lighted up depends on the ambient temperature as shown in the table on the right. Ambient temperature Lighting time -1°C to -15°C 0 seconds to 30 seconds -15°C or less 30 seconds 2. If the preheating pilot lamp (2) does not light up, or it lights up and then goes out to inform that the engine preheating has been completed, turn the key in starting switch (1) to the START position (C). A B 3. The starting motor will continue to turn and the engine will start. Keep the key in starting switch (1) at the START position (C) to keep the starting motor running until the engine starts.
C REMARK In low temperatures, to ensure lubrication of the engine and to improve the durability, no fuel is supplied to the engine for 3 sec- onds after the key in starting switch (1) is turned to the START position (C), so the engine will not start during this time. Therefore, keep the key in starting switch (1) at the START posi- tion (C) to keep the starting motor running until the engine starts. GK038021 4. After the engine starts, release the key in starting switch (1). The key will automatically return to the ON position (B). A B REMARK Keep the accelerator pedal depressed after the engine starts up, until engine warming-up run is finished. Do not step on the pedal to the full stroke.
C GK038021 WA380-6H – VEAM440100 3-99