Komatsu — Using switch to change between forward and reverse

3.3 Operation Operation Using switch to change between forward and reverse If the directional switch actuation switch is ON and the directional lever is operated to the FORWARD position (F) or REVERSE posi- tion (R), the direction of travel will change to FORWARD or REVERSE, regardless of the position of the directional switch at the side of the control levers on the machine. Priority is given to the operation of the directional lever, so be care- ful when operating. When this is done, the central warning lamp lights up and the alarm buzzer sounds. Set the directional lever and directional selector switch at the side of the work equipment control lever to the Neutral position (N) . 1.

Place the directional lever at the N position. F N R GK043144 2. Turn on directional selector switch actuation switch on the right side of switching panel that enables directional selec- tion. a Position (a): ON Position (b): OFF The two pilot lamps light up, i.e. one is the pilot lamp built in the actuating switch and another is the directional selector pilot lamp on the machine monitor. b GK038037 Then the actuating switch enables the forward - reverse shifting to function. If the switch or the lever is in one of the following conditions, set it to the correct position. !

When directional lever is not at Neutral position (N) If the directional lever is not at the Neutral position (N), the pilot lamp flashes, and at the same time, the central warning lamp lights up and the alarm buzzer sounds. In this condition, the machine will move forward or in reverse according to the set position of the directional lever. Return the directional lever to the Neutral position (N). GK043170 3-112 WA380-6H – VEAM440100 WARNING WARNING