4.4 Fuel, coolant and lubricants Use of fuel, coolant and lubricants according to ambient temperature Maintenance NOTE Use only diesel fuel. The engine mounted on this machine employs electronic control and a high-pressure fuel injection device to obtain good fuel con- sumption and good exhaust gas characteristics. For this reason, it requires high precision for the parts and good lubrication. If kerosene or other fuel with low lubricating ability is used, there wi ll be a big drop in durability. Note 1: Power train of oil has different properties from engine oil. Be sure to use the recommended oil. Note 2:
Axle oil AXO80 has the function of preventing squealing from the brakes and LSD (Limited Slip Differential). If only AXO80 is recommended, use KOMATSU genuine AXO80 or equivalent. Note 3: When the ambient temperature is higher than 45°C and the machine operation hour is longer than 12 hours/day, then the use of EO50-CD instead of AXO80 is recommended. Squealing of the brakes may occur with EO50-CD, but there is no problem with the brake performance or durability. Note 4: Hypergrease (G2-T, G2-TE) is high-performance grease. When it is necessary to improve the lubricating ability of the grease in order to prevent squeaking of pins and bushings, the use of G2-T or G2-TE is recommended. Note 5:
Supercoolant (AF-NAC) 1. The coolant has the important function of preventing corro- sion as well as preventing freezing. Even in the areas where freezing is not an issue, the use of antifreeze coolant is essential. KOMATSU machines are supplied with KOMATSU Super- coolant (AF-NAC). KOMATSU Supercoolant (AF-NAC) has excellent anticorrosion, antifreeze and cooling properties and can be used continuously for 2 years or 4000 hours. KOMATSU Supercoolant (AF-NAC) is strongly recom- mended wherever available. 4-20 WA380-6H – VEAM440100