4.4 Fuel, coolant and lubricants Recommended brands, recommended quality for products other than KOMATSU genuine oil Maintenance 4.4.3 Recommended brands, recommended quality for products other than KOMATSU genuine oil When using commercially available oils other than KOMATSU genuine oil, or when checking the latest specifications, refer to the KOMATSU web page or consult your KOMATSU distributor. REMARK When fuel sulphur content is less than 0.5%, change oil in the oil pan according to the periodic maintenance hours described in this manual. Change oil according to the following table if fuel sulphur content is above 0.5%.
When starting the engine with an atmospheric temperature of lower than 0°C, be sure to use engine oil of SAE10W, SAE10W- 30 and SAE15W-40, even though the atmospheric temperature goes up to 10°C more or less during the day. Use API classification CD as engine oil and if API classification CC, reduce the engine oil change interval to half. There is no problem if single grade oil is mixed with multigrade oil (SAE10W-30, 15W-40), but be sure to add single grade oil that matches the temperature range in the table. We recommend KOMATSU genuine oil which has been specifi- cally formulated and approved for use in engine and hydraulic work equipment applications. Specified capacity:
Total amount of oil including oil for compo- nents and oil in piping. Refill capacity: Amount of oil needed to refill system during nor- mal inspection and maintenance. ASTM: American Society of Testing and Material SAE: Society of Automotive Engineers API: American Petroleum Institute 4-22 WA380-6H – VEAM440100 Fuel sulphur content Change interval of oil in engine oil pan 0.5 to 1.0% 1/2 of regular interval above 1.0% 1/4 of regular interval