Komatsu — 4.6 Periodic replacement of safety critical parts

4.6 Periodic replacement of safety critical parts Maintenance Torque list 4.6 Periodic replacement of safety critical parts For using the machine safely for an extended period of time, you must periodically replace the safety critical and fire prevention- related parts listed in the table of important parts. Material quality of these parts can change as time passes and they are likely to wear out or deteriorate. However, it is difficult to determine the extent of wear or deterioration at the time of peri- odic maintenance. Hence, it is required to replace them with new ones regardless of their condition after a certain period of usage.

This is important to ensure that these parts maintain their full performance at all times. Furthermore, should anything abnormal be found on any of these parts, replace it with a new one even if the periodic replacement time for the part has not yet arrived. If any of the hose clamps show deterioration like deformation or cracking, replace the clamps at the same time as the hoses. Also carry out the following checks with hydraulic hoses which need not be replaced periodically. Tighten a loosened clamp or replace a defective hose, as required. When replacing the hoses, always replace the O-rings, gaskets, and other such parts at the same time.

Ask your KOMATSU distributor to replace the critical parts. WA380-6H – VEAM440100 4-25