Komatsu — 4.8 Replace injector assembly

4.8 Replace injector assembly Maintenance schedule chart Maintenance 4.8 Replace injector assembly This machine uses an engine that conforms with all exhaust gas regulations. The exhaust gas regulations differ according to the applicable area. To ensure that the engine conforms with the regulations in the area of use and can fully display its performance, keep to the following periodic maintenance intervals when adjusting the injector. If the periodic maintenance intervals are not observed correctly, the engine may not be able to display its performance fully, and it may also not conform with the regulations.

NOTE When transporting a machine from an A regulation area to a B regulation area, always replace all the injector assemblies before transporting the machine to the new area. Check with your KOMATSU distributor to confirm if your area of operation is an A regulation area or a B regulation area. ! A Regulation area EPA regulation areas and areas with the regulations equiva- lent to EPA regulations. ! B Regulation area Areas not applying EPA regulations or areas not applying regulations equivalent to EPA regulations. EVERY 8000 HOURS SERVICE Replace injector assembly Check the exhaust gas color visually.

If there is any abnormality in the exhaust gas color, please ask your KOMATSU distributor to carry out inspection or replacement. For details of the proce- dure if any abnormality is found, see "Engine (3-167)". 4-30 WA380-6H – VEAM440100