Komatsu — Check electrical intake air heater

4.9 Service procedure When required Maintenance Clean fins with compressed air Insert the jet nozzle through the gap between the radiator, oil cooler, aftercooler (1) and air conditioner condenser (2) to clean the fins. 1 2 GK038102 When cleaning the face behind the radiator, or oil cooler, and aftercooler (1), remove bolt (4) and plate (3), then insert the jet nozzle through the opening to clean the fins. 1 NOTE If the steam jet nozzle is brought too close to the radiator fins, it may damage the fins, so keep the nozzle a suitable distance away from the fins when cleaning. 3 4 Work under the following rough conditions. GK038103 ! Injection pressure: Max. 9.8 MPa ! Nozzle diameter: Max.

2 mm ! Distance between nozzle and radiator fins: Min. 100 mm Examine the rubber hoses, and if any hose is cracked or deterio- rated, replace it. Check also that there are no loose hose clamps. Check electrical intake air heater Before the start of the cold season (once a year), contact your KOMATSU distributor to have the electrical intake air heater checked for dirt or disconnections. 4-46 WA380-6H – VEAM440100