Komatsu — Selection and inspection of tires

4.9 Service procedure Maintenance When required Selection and inspection of tires If a tire or a rim is handled wrongly, the tire may burst or may be damaged and the rim may be broken and scattered, and that can cause serious injury or death. Since maintenance, disassembly, repair and assembly of the tires and rims require special equipment and skill, be sure to ask a tire repair shop to carry out the work. Do not heat or weld the rim to which the tire is installed. Do not make a fire near the tire. Selection of tires GK032084 Select the tires according to the conditions of use and the weight of the attachments on the machine.

Use only specified tires and inflate them to the specified pressure. Select the tires according to the conditions of use and the weight of the attachments of the machine. Use the following table. Since the travel speed indicated on the speedometer varies with the tire size, consult your KOMATSU distributor when using optional tires. WA380-6H – VEAM440100 4-53 WARNING WARNING WARNING WARNING Tire size Maximum load [kg] Standard Front and Rear 23.5-25 9,0 95