4.9 Service procedure Maintenance Every 2000 hours service Replace hydraulic tank breather element ! The parts and oil are at high temperature after the engine is stopped, and may cause burns. Wait for the temperature to go down before starting the work. ! When removing the oil filler cap, turn it slowly to release the internal pressure, then remove it. 1. Before removing the breather, wipe off all the dirt from around the breather. 2. Remove the cap of oil filler (F). 3. Remove breather (1) built into the cap. 4. Replace the filter element (2) built into the breather with a new part, then install breather (1) to the cap. F 5. Tighten the cap of oil filler (F).
GK038121 1 2 GK038125 WA380-6H – VEAM440100 4-79 WARNING WARNING