4.9 Service procedure Every 4000 hours service Maintenance Checking for missing fuel spray prevention cap, hardening of rubber The fuel spray prevention caps (12 places) on the fuel injection piping and both ends of the high-pressure piping act to prevent the fuel from coming into contact with high-temperature parts of the engine and causing a fire if the fuel should leak or spray out. Check visually and touch by hand to check that there are no missing caps, loose bolts or hardening of the rubber. If there are any problems, the parts must be replaced. In this case, please ask your KOMATSU distributor to carry out replacement. 4-88 WA380-6H – VEAM440100 GK038127