Attachments, Options 6.4 Joystick steering system 6.4.3 Operation method of joystick steering system ! It is dangerous to turn the machine suddenly at high speed, or to turn on steep hills. Do not operate the steering in such conditions. ! When turning, the articulation stops at the position where the steering wheel is turned to, but if the joystick is held in the tilted position, the body will articulate fully. ! The feeling when operating the steering with the joystick is different from when operating with the steering wheel, so be extremely careful until you have become used to operating the joystick. Check the adjustment and operation before starting the engine.
For details, see "Check before starting engine, adjust (3-81)". 1. Before starting the engine, check the operation of the joy- stick lever steering, check that the transmission directional lever is at N, and that the surrounding area is safe. REMARK Under the following conditions, a warning may be given when the engine is started. F N ! If the FNR switch on the joystick is at F or R, the joystick pilot lamp flashes, the central warning lamp lights up, and the alarm buzzer sounds. R GK043144 ! At the same time, “E00 J/S SW NEUTRAL“ is displayed on the character display. In this condition, the engine will not start, so set the FNR switch to N. !
If the joystick is not at the N position, the joystick pilot lamp flashes, the central warning lamp lights up, and the alarm buzzer sounds. ! At the same time, “E00 J/S LEVER POSI“ is displayed on the character display. In this condition, the engine will not start, so set the joystick to the N position. 2. Press the (a) part of the joystick ON/OFF switch to turn it ON. a b GK043186 WA380-6H – VEAM440100 6-17 WARNING WARNING