Komatsu — Inspection and maintenance item

3.2 Explanation of components Operation 3. Battery electrolyte level caution lamp (Option) This lamp (3) lights up to warn the operator that the battery elec- trolyte level has gone down. During checks before starting (when the starting switch is turned to the ON position but the engine is not started), this monitor lights up if the battery electrolyte level is low. At the same time, “E01“ is displayed on the top line of the char- acter display and “BATTERY LEV LOW“ is displayed on the bot- tom line, so check the electrolyte level and add distilled water.

GK043107 During operation (engine running) If the battery electrolyte level becomes too low, the battery elec- trolyte level caution lamp will light up. At the same time, “E01“ is displayed on the top line of the char- acter display and “BATTERY LEV LOW“ is displayed on the bot- tom line, so check the electrolyte level and add distilled water. 4. Maintenance caution lamp If the caution lamp lights up, repair the problem as soon as pos- sible. If this is left as it is, it will lead to failure. When the time for filter and oil change is reached, this lamp (4) flashes or lights up for approx. 30 seconds after completion of the system check when the starting switch is at the ON position.

GK032104 REMARK The maintenance caution lamp flashes when there is less than 30 hours to the replacement time, and after the replacement time has passed, it stay on. For details of the items covered by filter and oil replacement, see "Filter, oil replacement time display (3-14)". After replacing the filter or changing the oil, reset time for the replacement. For details, see "Reset method for filter, oil replacement time (3-35)". 3-24 WA380-6H – VEAM440100 CAUTION CAUTION