DRESSTA TD-25H — 5.13.2. CHANGING HYDRAULIC OIL

SECTION 5 MAINTENANCE Page 36 HYDRAULIC SYSTEM 5. Replace the two return filters of the hydraulic system and equipment pilot filter. Refer to "SERVICING THE RETURN FILTER". Service the suction strainer as described in "SERVICING THE SUCTION STRAINER". Service hydraulic reservoir filler strainer. Fig. 5.21. Hydraulic Reservoir Drain Plug Location Closed Open Fig. 5.21A. Hydraulic Reservoir Drain Valve (if equipped) 1. Safety Plug 2. Drain Hose 3. Reservoir Bottom IMPORTANT: Use clean oil from a clean container. Maintain all packaging and fittings so as to prevent leakage. 6. Reinstall the drain plug. Fill the reservoir with hydraulic oil up to the center line of the sight gauge.

Refer to Section 6, " REFILL SPECIFICATIONS AND CAPACITIES" for the quantity oil specified. Reinstall the filler cap. 7. Vent the system. Refer to "VENTING THE HYDRAULIC SYSTEM". TD-25H DRESSTA