N40475 Chapter 8 Interconnecting cables Interconnecting cables (figure 3) are used to join the engine (1), throttle (3), battery (4), via the marine junction box (2), to the instrument panel(s) (5). Cables are made in a 12m length as standard, 3, 6 & 9 lengths are optional. If a longer cable is required it should be ordered as a special item, to be made in one piece. Figure 2 shows: 1. Engine. 2. MJB (Marine Junction Box). 3. Throttle. 4. Battery (customer supplied). 5. Instrument panel - main or auxiliary. 6. MMPD, digital panel. 7. Keyswitch panel. 8. Harness, engine to MJB. 9. Harness, throttle. 10. Harness, main or auxiliary panel, J1939 requires tee connector. 11. Harness, keyswitch.
12. Harness, MMPD (digital panel). 13. Battery lead (customer supply). 14. Master/slave lead. Figure 2 Figure 3 Page 25