TM 5-3805-280-10 Driving the Machine CAUTION: Keep bystanders clear of machine when traveling. Before moving machine, determine which way to move propel levers. Keep bystanders clear of machine when traveling. T7405CM –UN–08APR91 The instructions below apply when the propel motors (E) are to the rear of the machine. If the propel motors are to the front of the machine, the machine moves OPPOSITE to the direction described. FORWARD TRAVEL: Push both levers forward (A). Short Turn (Counterrotate) REVERSE TRAVEL: Pull both levers rearward (B). NEUTRAL POSITION (C): Propel brakes automatically will stop and/or hold the machine. RIGHT TURN: Push left lever forward. T7405CN –UN–08APR91 LEFT TURN:
Push right lever forward. SHORT TURN (COUNTERROTATE): Push one lever forward and pull the other rearward. IMPORTANT: When traveling over long distances, swing upperstructure so propel motors are to the rear. Long Distance Travel LONG DISTANCE TRAVEL: When traveling over long distances, swing upperstructure so propel motors are to the rear. CAUTION: Prevent possible injury from machine tipping. Operate control levers slowly when traveling down a slope. TRAVELING DOWN A SLOPE: Operate control levers slowly when traveling down a slope. COLD WEATHER OPERATION: Propel lever dampers are provided for smooth control. In extremely cold weather, lever effort will increase.
Operate lever several times with pilot control shut-off lever in locked position. TX,10,FF2293 –19–15MAY92–2/2 6-4