TM 5-3805-280-10 Lubricant specifications ROCK DRILL LUBRICANTS SPECIFICATIONS We recommend the use of the MOBIL lubricants. These are selected to get the best performances out of our equipments. PNEUMATIC CIRCUIT Anti wear oils for pneumatic equipment ISO VG 46 for : t 0єC If the MOBIL products are not available, our war- ranty will apply only if high quality lubricants are used according to the following specifications and under the responsability of your supplier. ISO VG 100 for : t > 0єC Performances : film resistance HYDRAULIC CIRCUIT reinforced anti–wear Oil ISO VG 32 (ISO VG 46 when 10єC with stabilized anti–wear additive anti–corrosion anti–freeze (for : t OєC) Specifications :
Specifications : Viscosity at 40єC: 30 to 33 cSt (46 cSt) Pour point Pour point: Viscosity index VI: 150 (140) Flash point 218є C Viscosity at 40є C: 150 cSt De airing: 5 mn Viscosity index Vi: 140 Performances : Homologation: DENISON HFO GEAR BOX Anti wear: FZG 12 High pressure oil SAE 80 W 90 for transmissions. VICKERS 35 VQ 25 : total wear Performances : ASTM D 130 : cotation 1 a specifications: MIL-PRF-2105E Anti corrosion: CINCINNATI P 70 – pass Filterability: DENISON TP 02–100 : t GREASE MIL-PRF-10924G Oxydation stability NFT 60150 t > 2200 h for 1 a 2 ASTM D 943 Performances : specifications: MIL-PRF-2105E 9-8