John Deere 230LCR, 230LCRD — CHAPTER 10

TM 5-3805-280-10 Periodic Maintenance PREPARE MACHINE FOR MAINTENANCE Before performing maintenance procedures given in the following chapters and before leaving the operator’s seat, park the machine as described below unless another position is specified in the procedure. 1. Park machine on a level surface. 2. Lower bucket to the ground. 3. Turn auto-idle switch off. IMPORTANT: Turbocharger may be damaged if engine is not properly shut down. 4. Run engine with engine rpm dial at 1/3 position without load for 2 minutes. 5. Move engine rpm dial to slow idle position. 6. Turn key switch to OFF. Remove key from switch. 7. Pull pilot control shut-off lever to locked position.

TX,50,DH5079 –19–02JUL96–1/1 10-2