John Deere 230LCR, 230LCRD — CHAPTER 11

Maintenance—As Required TM 5-3805-280-10 SAMPLING ENGINE OIL NOTE: Sample engine oil every 50 hours or 90 days. 1. Run engine to warm oil. 2. Park machine on a level surface. 3. Lower bucket to the ground. IMPORTANT: Turbocharger may be damaged if engine is not properly shut down. 4. Run engine with engine rpm dial at 1/3 position without load for 2 minutes. T125092 –UN–28OCT99 5. Move engine rpm dial to slow idle position. 6. Attach a Not Operate” tag on the right control lever. 7. Pull pilot control shut-off lever to locked position. 8. Open engine hood and secure hood in open position. 9. Clean valve (A) and use to sample engine oil. CED,OUOE020,19 –19–17DEC99–1/1 11-1