John Deere 230LCR, 230LCRD — CHAPTER 15

Maintenance—Every 250 Hours TM 5-3805-280-10 CHECK SWING GEARBOX OIL LEVEL 1. Park machine on a level surface. 2. Remove dipstick (A). Oil must be in the operating range. 3. If oil is needed, remove filler cap (B) and add oil. (See Fuels and Lubricants chapter.) 4. Check oil level. T101491 –UN–15JUL96 TX,75,DH5088 –19–03JUL96–1/1 DRAIN HYDRAULIC TANK SUMP CAUTION: High pressure release of oil from pressurized system can cause serious burns or penetrating injury. The hydraulic tank is pressurized. Do not remove vent plug (A). Release pressure by loosening vent plug. T7869AT –UN–12NOV92 1. Loosen vent plug (A) to release hydraulic pressure. TX,75,DH5108 –19–11JUL96–1/2 2.

Loosen plug (F) for several seconds to drain water and sediment into a container. Do not remove plug completely. Dispose of waste properly. 3. Tighten sump plug and vent plug. T7869BN –UN–05NOV92 TX,75,DH5108 –19–11JUL96–2/2 14-1