TM 5-3805-280-10 Drifter maintenance DRIFTER MAINTENANCE Daily Every 1000 drilled meters Lubricate the drifter front part (5 or 6 shots of a hand grease pump). Dismount the shank adaptor to check the condi- tion of the splines. Replace shank if damaged. Weekly Check the wear of the flushing nozzle bronze bush (or front guide for drifter with reverse percussion). Check tightening of drifter mounting bolts. maximum wear = shank diameter+1 mm (.04 in). Replace the complete flushing nozzle by a reno- vated one if damaged (or replace the bronze bush for drifter with reverse percussion). 19-12