John Deere 230LCR, 230LCRD — CHAPTER 20

TM 5-3805-280-10 Maintenance BLEEDING THE FUEL SYSTEM 1. Open bleed screws (A) on fuel filter and on water separator. 2. Pump water separator primer (B) until fuel fills separator bowl and until fuel escapes from water separator bleed screw. T108260E –UN–27MAR97 3. Tighten water separator bleed screw. 4. Pump water separator primer (B) until fuel escapes from final fuel filter bleed screw. 5. Tighten final fuel filter bleed screw. T102673 –UN–02AUG96 TX,90,DH5581 –19–26JUL96–1/1 PRECAUTIONS FOR ALTERNATOR AND REGULATOR When batteries are connected, follow these rules: 6. Connect batteries or a booster battery in the correct 1.

Disconnect negative (-) battery cable when you polarity (positive [+] to positive [+] and negative [-] to negative [-]). work on or near alternator or regulator. 7. Do not disconnect the batteries when engine is 2. DO NOT TRY TO POLARIZE ALTERNATOR OR running and alternator is charging. REGULATOR. 8. Disconnect battery cables before you connect 3. Be sure alternator wires are correctly connected BEFORE you connect batteries. battery charger to the batteries. 4. Do not ground alternator output terminal. 5. Do not disconnect or connect any alternator or regulator wires while batteries are connected or while alternator is operating. T82,EXMA,I –19–03AUG92–1/1 20-2