TM 5-3805-280-10 Maintenance REPLACING BATTERIES Your machine has two 12 volt batteries with negative (-) ground. Batteries must meet one of the specifications below. Battery—Specification Cold Cranking Amps 1400 at -18 ° C (0 ° F) .................................................. Minutes Reserve Capacity 440 at 25 amps ................................................ If one battery in a 24-volt system has failed but the other is still good, replace the failed battery with one of the same type. For example, replace a failed maintenance-free battery with a new maintenance-free battery. Different types of batteries may have different rates of charge.
This difference could overload one of the batteries and cause it to fail. CED,OUOE020,49 –19–13APR99–1/1 REMOVING BATTERIES 1. Remove two wing nuts from battery cover. 2. Disconnect negative (-) battery cables first, then positive (+) cables. 3. Remove hold down brackets. 4. Lift batteries out of compartment. TX,90,DH5154 –19–10AUG96–1/1 20-7