TM 5-3805-280-10 Maintenance REPLACING BUCKET TEETH CAUTION: Guard against injury from flying pieces of metal; wear goggles or safety glasses. IMPORTANT: Angle the drift toward the bucket to T95784 –UN–10NOV88 avoid damaging the rubber pin lock. 1. Use a hammer and drift to drive out locking pin. NOTE: Alternate buckets may use different tooth assemblies. 2. Remove tooth. 04T,90,M16 –19–05APR91–1/3 3. Inspect rubber pin lock (A) for damage. Replace if necessary. 4. If rubber pin lock has moved, reposition in slot in adapter tooth shank. T95785 –UN–10NOV88 04T,90,M16 –19–05APR91–2/3 5. Position the new tooth over the tooth shank. 6. Drive the locking pin into the hole fully. NOTE:
Check bucket teeth periodically so that wear does not extend to the bucket tooth shank. T95786 –UN–10NOV88 04T,90,M16 –19–05APR91–3/3 20-12