TM 5-3805-280-10 Maintenance REPLACING BUCKET TOOTH TIP— HEAVY-DUTY BUCKET 1. Clean tooth (A) and tooth tip (B). 2. Insert lock removal tool under U-shaped pin (C). T6879EE –UN–06DEC88 CAUTION: Avoid possible injury. Pin may fly after it is released from tooth tip. Keep a firm grip on pin to prevent injury. 3. Remove pin. 4. Turn tooth tip counterclockwise and pull it towards you to remove. 5. Clean tooth shank. 6. Replace U-shaped pin at same time you replace tooth tip. T7527DO –UN–27JUN91 7. Insert tooth tip on shank turning tip clockwise. 8. Install U-shaped pin. Side of pin marked ’FRONT’ (D) must face tooth tip. Make sure pin is firmly engaged over tooth tip.
A—Tooth B—Tooth Tip C—Pin Mark 04T,90,K273 –19–28JAN92–1/1 DO NOT SERVICE CONTROL VALVES, CYLINDERS, PUMPS OR MOTORS Special tools and information are needed to service control valves, cylinders, pumps, or motors. If these parts need service, see your authorized dealer. TX,90,FF3114 –19–18NOV92–1/1 20-14