John Deere 230LCR, 230LCRD — CHAPTER 20

TM 5-3805-280-10 Maintenance ANGLE FITTING 1. Back-off lock nut (A) and back-up washer (B) completely to head-end (C) of fitting. 2. Turn fitting into threaded boss until back-up washer contacts face of boss. T6520AB –UN–18OCT88 3. Turn fitting head-end counterclockwise to proper index (maximum of one turn). NOTE: Do not allow hoses to twist when tightening fittings. 4. Hold fitting head-end with a wrench and tighten locknut and back-up washer to proper torque value.

04T,90,K66 –19–19MAR96–2/2 20-22 STRAIGHT FITTING OR SPECIAL NUT TORQUE CHART Thread Size N•m lb-ft 3/8-24 UNF 8 6 7/16-20 UNF 12 9 1/2-20 UNF 16 12 9/16-18 UNF 24 18 3/4-16 UNF 46 34 7/8-14 UNF 62 46 1-1/16-12 UN 102 75 1-3/16-12 UN 122 90 1-5/16-12 UN 142 105 1-5/8-12 UN 190 140 1-7/8-12 UN 217 160 NOTE: Torque tolerance is ± 10%.