TM 5-3805-280-10 Safety SUPPORT MACHINE PROPERLY Always lower the attachment or implement to the ground before you work on the machine. If you must work on a lifted machine or attachment, securely support the machine or attachment. Do not support the machine on cinder blocks, hollow tiles, or props that may crumble under continuous load. Do not work under a machine that is supported solely by a jack. Follow recommended procedures in this manual. TS229 –UN–23AUG88 DX,LOWER –19–04JUN90–1/1 SERVICE COOLING SYSTEM SAFELY Explosive release of fluids from pressurized cooling system can cause serious burns. Shut off engine. Only remove filler cap when cool enough to touch with bare hands.
Slowly loosen cap to first stop to relieve pressure before removing completely. TS281 –UN–23AUG88 DX,RCAP –19–04JUN90–1/1 1-17