21-14 Operational Checkout CYCLE TIMES CHECK CAUTION: Make sure area is clear and large enough to operate all functions of machine. IMPORTANT: Warm hydraulic oil to operating temperature for this check. Engine at fast idle. Auto-idle switch OFF. BOOM T6477AQ –UN–19OCT88 ARM, BUCKET, SWING, PROPEL Move machine to position shown for each test. Record cycle time for each function.
Function Typical New (Seconds) Boom Raise (cylinder 3.1 ± 0.3 with 2.96 m (9 ft extend) 9 in.) arm T7884AE –UN–10NOV92 Boom Lower (cylinder 2.5 ± 0.3 with 2.96 m (9 ft retract) 9 in.) arm Arm In (cylinder extend) 3.9 ± 0.3 Arm Out (cylinder retract) 2.6 ± 0.3 Bucket Load (cylinder 4.1 ± 0.3 extend) Bucket Dump (cylinder 2.5 ± 0.3 retract) Swing Left or Right 3 14.4 ± 1.0 Revolutions From a Running Start Propel: 20 m (65 ft) From a Running Start (check in forward and reverse) propel speed switch in 13.4 ± 0.6 FAST position propel speed switch in 20.6 ± 2.0 SLOW position Does machine perform within specifications? YES: Go to next check. NO: Go to your authorized dealer.
– – –1/1 Function Typical New (Seconds) Boom Raise (cylinder extend) 3.1 ± 0.3 with 2.96 m (9 ft 9 in.) arm Boom Lower (cylinder retract) 2.5 ± 0.3 with 2.96 m (9 ft 9 in.) arm Arm In (cylinder extend) 3.9 ± 0.3 Arm Out (cylinder retract) 2.6 ± 0.3 Bucket Load (cylinder extend) 4.1 ± 0.3 Bucket Dump (cylinder retract) 2.5 ± 0.3 Swing Left or Right 3 Revolutions From a Running Start 14.4 ± 1.0 Propel: 20 m (65 ft) From a Running Start (check in forward and reverse) propel speed switch in FAST position 13.4 ± 0.6 propel speed switch in SLOW position 20.6 ± 2.0