John Deere 230LCR, 230LCRD — CHAPTER 21

21-16 Operational Checkout SPROCKET WEAR CHECK Inspect drive sprocket. Is tooth wear excessive? NOTE: Do not evaluate sprocket by condition of tooth tip. Tooth tip wear does not affect sprocket operation if it does not extend into the bushing contact area. NOTE: Reverse drive side wear is generally more than T6981AC –UN–13MAR89 forward drive side wear. YES: Go to your authorized dealer. NO: Go to next check. – – –1/1 GROUSER WEAR, BENT TRACK SHOE, AND LOOSE HARDWARE CHECKS Inspect for worn grousers, bent track shoes, and loose shoe hardware. Are grouser bars worn excessively? Are track shoes bent? Is track shoe width appropriate for ground condition?

T7322AF –UN–21JUN90 Is track shoe hardware tight? NOTE: Excessive grouser wear weakens track shoes and may result in track shoes bending. YES: If shoe hardware is loose, remove shoe and clean joint before tightening. Go to Check Track Shoe Torque in Maintenance chapter. NO: Go to next check. – – –1/1 TRACK LINK ROLLER AND FRONT IDLER WEAR CHECKS Inspect track links for pin boss wear. Do link pin boss areas indicate contact with roller flanges or track guides? NOTE: Some contact or wear is normal. Excessive contact or wear indicates excessive rail wear. Inspect front idler flanges. T6484AZ –UN–19OCT88 Do idler flanges contact bushings? NOTE:

Idler contact with bushings indicates excessive chain rail wear and idler tread surface wear. YES: Go to your authorized dealer for additional track component information. NO: Go to next check. – – –1/1