John Deere 230LCR, 230LCRD — CHAPTER 21

21-21 Operational Checkout ALL LINES AND HOSES Engine OFF. Inspect all lines and hoses. Are lines and hoses straight, NOT kinked or worn from rubbing on other machine parts or "weather checked"? Are hose and line connections clean NOT showing signs of leakage, such as oil or dust accumulation at fittings? All hose and line clamps must be in place and tight. Clamps must have rubber inserts or cushions in place to prevent clamps from crushing or wearing into hoses or lines? YES: Check complete. NO: Reposition hoses or lines and tighten or replace clamps. Tighten fittings or replace O-rings in fittings. Replace hoses or lines as required. – – –1/1 EVAPORATOR CORE CHECK Engine ON.

Blower switch on high. Is air from ducts cool and air flow good? Is water dripping from evaporator drain hose? YES: Check complete. NO: Repair, replace or clean evaporator. – – –1/1 CONDENSER CHECK Engine OFF. Inspect condenser cores. Is condenser core free of dirt or debris? Does condenser show signs of leakage, dust accumulation or oily areas? Are condenser fins straight, not bent or damaged? Inspect engine fan. Are fan blades in good condition, not worn, bent, broken or missing? YES: Check complete. NO: Clean, repair or replace condenser core. Replace engine fan. – – –1/1