John Deere 230LCR, 230LCRD — CHAPTER 21

21-30 Operational Checkout COOLANT LEVEL AND COOLANT CONDITION IN RADIATOR CHECKS CAUTION: Prevent possible injury. DO NOT remove cap unless engine is cool. Engine OFF and cool. Remove radiator cap. Inspect coolant level. Inspect coolant condition. Is coolant level at bottom of fill neck on radiator? Is coolant clear, not oily, foamy or rust colored? YES: Go to next check. NO: Add or replace coolant. (See ’Check Coolant Level’ in Maintenance-Every 250 Hours chapter.) – – –1/1 COOLANT HOSES AND CLAMPS CHECKS Are radiator and heater hoses free of twists, kinks, cracks, leaks, or wear from rubbing on adjacent parts? Are hose clamps tight and installed correctly? YES: Go to next check. NO:

Replace hoses as required. Tighten or reinstall hose clamps. – – –1/1 FAN SHROUD AND FAN GUARD CHECKS Check fan to fan shroud clearance. Is fan centered in shroud? Is guard free of damage? Are all mounting brackets and hardware tight? T6488GN –UN–19OCT88 YES: Go to next check. NO: Adjust fan shroud to center fan. Repair or replace guard. Tighten loose hardware. Replace fan shroud if needed. – – –1/1