TM 5-3805-280-10 Troubleshooting Symptom Problem Solution Injection nozzles Go to your authorized dealer. Engine Go to your authorized dealer. Exhaust Gas Is White Wrong fuel Use correct fuel. Cold engine Run engine until warm. Thermostat faulty or too ’cool’ Go to your authorized dealer. Injection pump Go to your authorized dealer. Coolant leakage into engine cylinder Go to your authorized dealer. Turbocharger Excessively Noisy Bearings not lubricated Insufficient oil pressure. Check for Or Vibrates restricted turbocharger oil line. Worn bearings Go to your authorized dealer. Air leak in engine, intake, or exhaust Inspect, repair.
manifold Improper clearance between turbine Go to your authorized dealer. wheel and turbine housing Broken blades on turbine Remove exhaust elbow and air inlet hose and inspect. Oil Dripping From Turbocharger Damaged or worn bearings and/or Go to your authorized dealer. Adapter worn seals Excessive crankcase pressure Check vent tube to ensure tube is not clogged. Clean. Turbocharger oil return line carbon Remove line. Inspect, clean. buildup where line passes exhaust manifold Excessive Drag In Turbocharger Carbon buildup behind turbine wheel Inspect, clean. Rotating Members caused by combustion deposits Dirt buildup behind compressor Inspect, clean.
wheel caused by air intake leaks Continued on next page TX,100,DH5155 –19–10AUG96–5/6 22-6