TM 5-3805-280-10 Operator’s Station REMOVING AND STORING THE LOWER FRONT WINDOW NOTE: Upper front window must be raised before lower front window can be removed. 1. Pull in on lock pins (A) to unlock and remove window. T101651 –UN–24JUN96 TX,10,DH5491 –19–27FEB97–1/2 2. The window can be stored by inserting tabs on bottom of window into brackets (B) and locking the pins into holes (C) located below rear window in cab. NOTE: In cold weather some operators may choose to work with the top glass open and the bottom glass in place. This provides excellent visibility and tends to hold the heat being circulated around the operator’s feet.
T105380 –UN–26NOV96 TX,10,DH5491 –19–27FEB97–2/2 OPENING SIDE WINDOWS CAUTION: Avoid serious crushing injury from boom. Never place any part of body beyond window bar or frame. It could be crushed by the boom if boom control lever is accidentally bumped or otherwise engaged. T101653 –UN–24JUN96 Do not remove window bars. If window or bars are missing or broken, replace immediately. Both right side window and cab door window can be opened. 1. Right-rear side window: Unlatch the lock (A). Push joint part of lock to open window. 2. Cab door window: Slide front pane to the rear and rear pane to the front. TX,10,DH5492 –19–04JUN96–1/1 2-23