TM 5-3805-280-10 Break-In EVERY 10 HOURS OR DAILY 1. Perform 10 hours or daily service. (See Maintenance— Every 10 Hours or Daily chapter.) 2. Watch for fluid leaks. 3. Lubricate working tool pivots every 10 hours during the first 30—100 hours of operation and when working in mud or water. (See Maintenance—Every 50 Hours chapter.) TX,15,DH5497 –19–12JUL96–1/1 AFTER THE FIRST 50 HOURS 1. Perform 10 hours or daily and 50 hour service. (See Maintenance—Every 10 Hours or Daily and Maintenance—Every 50 Hours chapters.) 2. Change hydraulic oil filter (See Maintenance—Every 500 Hours chapter) and pilot filter (See Maintenance— Every 1000 Hours chapter). 3. Check accessible hardware torque.
(See Hardware Torque Specifications in Maintenance chapter.) TX,15,DH5498 –19–06JUL94–1/1 3-2