Komatsu — eebm001902 a3.pdf

STRUCTURE AND FUNCTION CLSS Operation 1. When pump swash plate angle is controlled to minimum. a. When the arm is operared to OUT, if the load increases, the LS pressure passing through the inside of arm spool (11) rises. b. The LS pressure also goes to unload valve (28) and unload valve (28) is closed. The main circuit pressure rises and is relieved at the standard mode relief pressure. 2. When this happens, the pump pressure sensor detects it and increases the PC-EPC current (electronic cut- off control) to set the pump swash plate angle to the minimum. 10-79