STRUCTURE AND FUNCTION ATTACHMENT LINE FLOW CONTROLLER The purpose of the attachment flow control system is to limit the maximum flow of oil through the first attachment circuit on machines that are so equipped. The flow setting is selected by means of a thumbwheel switch fitted in the operators cab switch panel. The layout of the system is shown as follow: The flowcontroller sends a steady current signal to the E.P.C. solenoid valve dependent on the switch position selected at the operator’s cab switch. The E.P.C.
solenoid then sets the pressure of the hy- draulic oil supply to the right hand attachment pedal, this limiting the maximum PPC signal pressure taht can be applied to the attachment spool. See also page 10-114 for description of the attachement pedal) a b a Adjustment knob b Wiring connector 10-118