TESTING AND ADJUSTING M-23 When starting switch is at OFF and time switch is pressed, time and service meter are not displayed ......................................................................... 20-268 M-24 Defective fuel lever sensor system ................................................................................... 20-269 M-25 Defective coolant temperature sensor system ................................................................. 20-270 M-26 Defective engine oil sensor system ..................................................................................
20-271 M-27 Defective coolant level sensor system ............................................................................. 20-272 M-28 Defective hydraulic oil level sensor system ...................................................................... 20-273 M-29 Wiper does not work, or switch is not being used but wiper is actuated .......................... 20-274 M-30 Washer motor does not work, or switch is not being used but washer motor is actuated ........................................................................................................................
20-279 When carrying out testing, adjusting, or troubleshooting, park the machine on level ground, inset the safety pins, and blocks to prevent the machine from moving. When carrying out work together with other workers, always use signals and do not let unauthorized people near the machine. When checking the water level, always wait for the water to cool down. If the radiator cap is removed when the water is still hot, the water will spurt out and cause burns. Be careful not to get caught in the fan, fan belt or other rotating parts. 20-5