Komatsu — eebm001902 a3.pdf

TESTING AND ADJUSTING FAN BELT TENSION TESTING AND ADJUSTING FAN BELT TENSION 1. Tensing a. Check the deflection of the belt when the belt is pressed with a finger force of approximately 58.8 N (6 kg) at a point midway between the tension pulley and fan pulleu. 2. Adjusting a. Loosen mounting bolts (2) and (3), bolt (4), nut (5), and belt tension adjustment bolt (6) of tension pul- ley. b. Lever the tension pulley and watch the tension of the fan belt through the clearance from the cylin- der block. When the tension is correct, tighten the adjustment bolt (6) first, then tighten tension pul- ley mounting bolts (2) and (3), and nut (5). c.

After adjusting the belt tension, check again to confirm that the belt tension is within the standard value. # After adjusting the belt, run the engine for at least 15 minutes, then measure the deflection of the belt again. 20-31