POINTS TO REMEMBER WHEN CARRYING OUT MAINTENANCE To maintain the performance of the machine over a long period, and to prevent failures or other troubles before they occur, correct operation, maintenance and inspection, troubleshooting and repairs must be carried out. This section deals particularly with correct repair procedures for mechanics and is aimed at improving the quality of repairs. For this purpose, it gives sections on “Handling electric equipment” and “Handling hydraulic equipment” (particularly gear oil and hydraulic oil). Points to remember when handling electric equipment 1. Handling wiring harnesses and connectors.
Wiring harnesses consist of wiring connecting one component to another component, connectors used for connecting and disconnecting one wire from an- other wire, and protectors or tubes used for protecting the wiring. Compared with other electrical components fitted in boxes or cases, wiring harnesses are more likely to be affected by the direct effects of rain, water, heat or vi- bration. Furthermore, during inspection and repair op- erations, they are frequently removed and installed again, so they are likely to suffer deformation or dam- age. For this reason, it is necessary to be extremely careful when handling wiring harnesses. a. Main failures occurring in wiring harness. i.
Defective contact of connectors (defective contact between male and female). Prob- lems with defective contact are likely to occur because the male connector is not properly inserted into the female connector, or be- cause one or both of the connectors is de- formed or the position is not correctly aligned, or because there is corrosion or oxi- dization of the contact surfaces. 20-60 TERSOTUIBNLGE ASNHDO AODTIJNUGSTING POINTS TO REMEMBER WHEN CARRYING OUT MAINTENANCE