Komatsu — eebm001902 a3.pdf

TROUBLESHOOTING POINTS TO REMEMBER WHEN CARRYING OUT MAINTENANCE Points to remember when handling hydraulic equipment With the increase in pressure and precision of hydraulic equipment, the most common cause of failure is dirt (for- eign material) in the hydraulic circuit. When adding hydrau- lic oil, or when disassembling or assembling hydraulic equipment, it is necessary to be particularly careful. 1. Be careful of the operating environment. Avoid adding hydraulic oil, replacing filters, or repairing the machine in rain or high winds, or in places where there is a lot of dust. 2. Disassembly and maintenance work in the field.

If dis- assembly or maintenance work is carried out on hy- draulic equipment in the field, there is danger of dust entering the equipment. It is also difficult to confirm the performance after repairs, so it is desirable to use a unit exchange. Disassembly and maintenance of hy- draulic equipment should be carried out in a specially prepared dustproof workshop, and the performance should be confirmed with special test equipment. 3. Sealing openings. After any piping or equipment is re- moved, the openings should be sealed with camps, tapes, or vinyl bags to prevent any dirt or dust from entering.

If the opening is left open or is blocked with a rag, there is a danger of dirt entering or of the sur- rounding area being made dirty by leaking oil. Do not simply drain oil out on to the ground. Collect it and ask the customer to dispose of it, or take it back with you for disposal. 4. Do not let any dirt or dust get in during refilling opera- tions. Always keep the oil filler and the area around it clean, and always use clean pumps and oil containers. If an oil cleaning device is used, it is possible to filter out the dirt that has collected during storage. 20-66