TROUBLESHOOTING N-MODE Table 1 When each controller is not connected to the network, “—-“ is displayed. If the correct letter or number is not displayed (another model is displayed), there is an abnormality in the controller model selection. Table 2 Light up when connected Engine throttle • pump controller; Engine throttle • pump controller; EPC valve controller Checks can be carried out with code 08 only when there is a disconnection in the network. When there is a short circuit with the ground, the display does not change. Therefore, the basic situation is to use Table 1 to check the connection condition when there is a short circuit with the ground.
N-1 Related electric circuit diagram 20-103 Monitoring code Display 01 Monitor panel model code 220 02 Engine throttle • pump controller model code 290 03 Engine throttle • pump controller model code 290 Display Monitoring code 08 Network connection condition