Komatsu — eebm001902 a3.pdf

TROUBLESHOOTING S-MODE The basic method of using the troubleshooting chart is as follows. Items listed for Question and Check Items that have a relationship with the Cause items are marked with O, and of these, causes that have a high probabil- ity are marked with OO. Check each of the Questions and Check items in turn, and not the O and OO in the chart for items where the problem appeared. The vertical column (Causes) that has the highest number of points is the most probable cause, so start troubleshooting for that item to make the final confirmation of the cause. 1.

For [Confirm recent repair history] in the Question section, ask the user, and mark the Cause column with a Œ to use as reference for locating the cause of the failure. However, do not use this when making calculation to narrow down the causes. 2. Use the Œ in the Cause column as reference for [Degree of use (Operated for long period)] in the Questions section as reference. As a rule, do not use it when calculating the points for locating the cause, but it can be included in necessary to determine the order for troubleshooting. 20-135