Komatsu — eebm001902 a3.pdf

STRUCTURE AND FUNCTION HYDRAULIC PUMP Operation 1. Operation of pump a. Cylinder block (7) rotates together with shaft (1), and shoe (5) slides on flat surface A . When this happens, rocker cam (4) moves along cylindrical surface B , so angle aa be- tween center line X of rocker cam (4) and the axial direction of cylinder block (7) changes. (Angle aa is called the swash plate angle.) b. Center line X of rocker cam (4) maintains swash plate angle aa in relation to the axial direction of cylinder block (7), and flat sur- face A moves as a cam in relation to shoe (5).

In this way, piston (6) slides on the in- side of cylinder block (7), so a difference be- tween volumes E and F is created inside cyl- inder block (7). The suction and discharge is carried out by this difference F-E. In other words, when cylinder block (7) rotates and the volume of chamber E becomes smaller, the oil is discharged during that stroke. On the other hand, the volume becomes larger, the oil is sucked in. c. If center line X of rocker cam (4) is in line with the axial direction of cylinder block (7) (swash plate angle = 0), the difference be- tween volumes E and F inside cylinder block (7) becomes 0, so the pump does not carry out any suction or discharge of oil.

(In fact, the swash plate angle can never be- come 0.) 10-21