Komatsu — eebm001902 a3.pdf

TROUBLESHOOTING M-CODE M-6 When starting switch is turned ON, monitor panel lamps all stay lit up and do not go out M-7 When starting switch is turned ON, items lit up on monitor panel are different from actual machine (model) # Immediately after replacing the monitor panel, turn the starting switch OFF, then turn it On again and check Table 1 20-249 Cause Remedy Defective monitor panel Replace 1 YES Is display of monitoring code 01 as shown in table? • Turn starting switch NO ON. • Set to monitoring code 01. Cause Remedy Defective monitor panel Go to troubleshooting for C mode (See C-16) Replace -