Komatsu — eebm001902 a3.pdf

TROUBLESHOOTING M-CODE M-30 Washer motor does not work, or switch is not being used but washer motor is actuated # Before carrying out troubleshooting, check that all the related connectors are properly inserted. # Always connect any disconnected connectors before going on the next step. a) Washer motor does not work # Check that fuse 5 is normal. a)-1 When E114 is displayed Replace Is resistance of washer motor normal? 2 YES Defective monitor panel 1 Is voltage between PO2 (female) (2), (10), M28 (female) (1) and chassis normal? Turn starting switch OFF. Disconnect P02, M28. Connect T-adapter to P02 (female) or M28 (female). Turn starting switch to ON or OFF. Max. 1V.

YES Defective washer motor (internal short circuit) Turn staring switch OFF. Disconnect W28. Check as individual part. 5 - 20 NO Replace Short circuit in wiring harness between P02 (female) (2), (9) and M28 (female) (1) Replace NO 20-279 Cause Remedy