Komatsu — eebm001902 a3.pdf

DISASSEMBLY AND ASSEMBLY STARTING MOTOR STARTING MOTOR Removal Disconnect the cable from the negative (-) terminal of the battery. 1. Open engine hood. 2. Disconnect 3 wires (1). 3. Remove 2 bolts (2) and mounting nut. 1 4. Remove starting motor assembly (3). 2 Installation Carry out installation in the reverse order to removal. 1 Starting motor mounting bolt: 43 ± 6 Nm (4.38 ± 0.61 kgm) 2 Both faces of starting motor gasket: Gasket sealant (LG-1) 30-14