Komatsu — eebm001902 a3.pdf

CLSS STRUCTURE AND FUNCTION Basic principle 1. Control of pump swash plate angle. a. The pump swash plate angle (pump dis- charge amount) is controlled so that LS dif- ferential pressure L PLS (the difference between pump pressure PP and control valve outlet port LS pressure PLS ) (load pressure of actuator) is constant. (LS pres- sure L PLS = Pump discharge pressure PP - LS pressure PLS ) b.

If LS differential pressure L PLS becomes lower than the set pressure of the LS valve (when the actuator load pressure is high), the pump swash plate moves towards the maximum position; if it becomes higher than the set pressure of the LS valve (when the actuator load pressure is low), the pump swash plate moves towards the minimum position. 10-49