. OPERATION DETAILED CONTROLS AND GAUGES Auto Switch Display Monitor Monitor (7) displays the status of temperature setting (a), air flow (b), and vents (c). When OFF switch (1) is pressed, the display of temperature setting (a) and air flow (b) goes out, and operation stops. 3 - 90 With s (RECIRC/FRES H) are a utomati cally selected accord ing to the set temperature. Press switch ( 5), then use te mperatur e control sw itch (3) to set the te contr When it is p ossible to use the swit sourc REMARK When A uto Mod e is selected, if the set t emperature is set to 18.0 ° C (64.4 °F) or 3 2.0 °C ( 89.6 °F) , the air f low is alway s set to High, bu t this is not a p roblem .
FRESH/RECIRC Selector Switch Switch ( 6) is use d to switch the air sourc e between r ecirculation of the air in side the cab an d intake of fresh air from the outside. Durin g autom atic operation, th e selection of inside air (RECIRC) and o utside ai r (FRESH) is p erformed automatica lly. O RECIRC Us utside air is shut off and only air inside the cab is circulated. e this setting to perform rapid cooling of the cab or when outside air is dirt Ou FRESH Us tside air is taten into the cab. e this setting to take in fresh air when performing demisting.