Komatsu — BEFORE STARTING ENGINE

. OPERATION MACHINE OPERATIONS AND CONTROLS MACHINE OPERATIONS AND CONTROLS BEFORE STARTING ENGINE WARNING linkage, and hoses. If any problem is 4. Check for leakage from fuel line. Check that there is no leakage of fuel or damage to the hoses and tubes. If any problem is found, carry out repairs. idler, guard) for damage, wear, loose bolts, or leakage of oil from 3 - 109 Walk-around Checks Before star ting the engine, walk around the machine and look at th e undersid e of chassis for anything unusua l like loose bolts and nuts, leakage of fuel, oil and coolant. Also check the condition of the work equipment and the ystem.

for loose wiring, play, and collection of dust at places that reach high temperature. and hydraulic s Also check for loose wiring, play, and co llection of dust at places t hat reach high temperatur Remove any flammable materials from aroun d the battery, engine, muffler, turbocharg er, or other high te mperature engine p arts. Leakage of f uel or oil will cause the machine t o catch fire. Check carefully, b e sure to re pair any problem, o r contact your Komatsu distributor. Perform th e following inspections and cl eaning every day before s tarting eng ine for the day's 1. Check for damage, wear, play in wo rk equipment, cylinders, li nkage, hos Check found, 2.

Remov e dirt and debris from around the engine, battery, and r adiator. Check etc.) ar flamma For the FINS, COND for dirt accumulated around th e engine and radiator. Also check for flammable mate rial (dry leaves, t wigs, ound the battery, engine mu ffler, turbocharger, or other high temperature engine parts. If any dirt or ove them. cumulated on the radiator fins, see "CLEAN AND INSPECT RADIATOR ERCOOLER FINS,FUEL COOLER FINS, AND AIR CONDITIONER ble materials are found, rem removal of dust and dirt ac OIL COOLER FINS, AFT ENSER FINS (PAGE 4-60)". 3. Check for coolant and oil leakage ar ound the engine Check it. for oil leakage from the engin e and coolant leaks from th e cooling s ystem.

If any pr oblem is found, r epair 5. Check for oil leakage from hydraulic equipment, hydraulic tank , hoses, a for oil leakage. If any problem is found, repair the area where oil i 6. Check the undercarriage (track, spr roblem is found, repair it. rollers. If any p 7. Check for problems in handrails, ste If any p roblem is found, repair it. Tig