. OPERATION MACHINE OPERATIONS AND CONTROLS OPERATION MACHINE OPERATIONS AND CONTROLS NOTICE Steps 6 to 10 until the display is the correct temperature. (A) Display when temperature is correct: Monitor background 3 - 138 When the work equi pment is retracted, take care t hat it does not int erfere with the machine bo 6. Move right w ork equipment control le ver (5) slowly i n the direction to pu ll in the bucket (D). Opera te the lever to th e end of its travel an d hold it in position for 30 7. Move right w ork equipment control le direction to p ush out the bucket (C). Op erate the lever t o the end of its trav el and hold it in position for 30 seconds. 8.
Next, move le ft work equipment control l ever (6) slowly in the direction to pu ll in the arm (B). Oper ate the lever to the end of i ts travel and hold it in posit ion for 30 secon ds. 9. Move left wor k equipment control lever ( 6) slowly in the d irection to push ou t the arm (A). Operate the lever to the end of its travel and hold it in positio n for 30 seconds 10. Repeat the o peration in Steps 6 to 9 for 11. Check that hy draulic oil temperature monitor (7) is displaying mperature.
ic oil temperature monitor is not displaying the rature (it is displaying low temperature), repeat the correct te If the hydraul correct tempe rature (it is displaying low temperature), r epeat (C) is blue (B) Display when temperature is low: Monitor background (C) is white 12. Check that engine coolant temperature monitor (1) displays the correct temperature. (A) Display when temperature is correct: Monitor background (C) is blue (B) Display when temperature is low: Monitor background (C) is white If it displays low temperature, carry out additional warm up of the engine until engine coolant temperature monitor (1) displays the correct temperature.
For details of the procedure, see "Engine Warm Up (PAGE 3-134)". 12. the correct te (A) Display when temperature is correct (C) is blue nitor background (C) white additional warm up of the engine displays the c until engine coolant temperature monitor (1) orrect temperature. the procedure, see "Engine Warm Up (PAGE For details of 3-134)".